Flip-flop hub instructionsUpdated 10 months ago

Tools

• What you need: Included Wrench

Ride Freewheel or Fixed

1. Loosen the bolt on the rear tire facing behind the bike to the back.
2. Loosen and remove the bolts and washers on both sides of the tire.
3. Pull the tire towards the frame of the bike and slip the chain off the cog.
4. Wiggle the tire out, remove the chain from the tire completely, and take the tire out of the frame.
5. Flip the tire around and place it back into the frame.
6. Replace the chain on the cogs.
7. Replace the metal bracket that was facing behind the bike.
8. Replace the washers and bolts on both sides of the tire and begin tightening, alternating between sides to ensure evenness.
9. Pull the tire back slightly so the chain is taut.
10. Tighten the bolt against the bracket facing behind the bike.